For use with TotalBoat High Performance Epoxy Resin only
Provides a medium-speed cure time at room temperature that is adequate for most common applications
Can be combined with other TotalBoat High Performance Hardeners to customize or fine-tune working properties and cure time
Color: Clear
Sizes: Group Size A – Pint (15.4 fl. oz.), Group Size B – Half Gallon (62.9 fl. oz.), Group Size C – Gallon (127.4 fl. oz.)
Medium hardener is also available in a 26.1 gallon container, for use with drums of High Performance Resin. Please contact us for pricing.
Note: Hardener sizes correspond to group sizes of TotalBoat High Performance Epoxy Resin (sold separately)
TotalBoat High Performance Epoxy Resin and High Performance Non-Blushing Hardeners can be poured (to measure by weight or volume), or dispensed in exact measure using TotalBoat 2:1 Epoxy Pumps. Our 2:1 Epoxy Pumps are intended for use only with TotalBoat High Performance Epoxy Resin and Hardener containers, and they will not fit other marine 2:1 epoxy resin and hardener containers.
Which TotalBoat High Performance Hardener Do I Need for My Project?
High Performance Fast Hardener– Use High Performance Fast Hardener for the fastest cure and shortest working time at room temperature, or for an overnight cure in low temperatures (minimum 55°F).
High Performance Medium Hardener– Use High Performance Medium Hardener for most common applications, or for an overnight cure at room temperature (77°F).
High Performance Slow Hardener– Use High Performance Slow Hardener for extended working time and cure time at room temperature, or when working in warmer temperature conditions. If you are new at working with epoxy resin, the slow speed hardener will give you more working time, which you may find helpful.
Even better, you can customize pot life and cure time further by combining the different hardeners with each other. Just remember to always maintain the proper ratio of 2 parts resin to 1 part hardener by volume.
Specifications:
High Performance Epoxy Resin Color: Clear
High Performance Medium Hardener Color: Clear
Mix ratio by volume: 2 parts resin to 1 part hardener
Application: Brush, roller, or syringe; can also be poured and spread with an epoxy spreader
Minimum recommended temperature: 55°F
Recommended temperature for dispensing via pump: 60-70°F
Pot life @ 77°F: 25 minutes
Tack-free time @ 77°F: 3 hours
Full cure @ 77°F: 3.5 days
Safety information: Work in a well-ventilated area and wear protective eyewear, protective clothing, and suitable gloves
Properties (Admixed)
High Performance Fast Hardener
High Performance Medium Hardener
High Performance Slow Hardener
Color
Clear
Clear
Clear
Mix Ratio by Volume (Resin:Hardener)
2:1
2:1
2:1
Mix Ratio by Weight (Resin:Hardener)
100A:46B
100A:45B
100A:45B
Gel Time at 77°F (150g mass)
10 min.
25 min.
40 min.
Tack-Free Time at 77°F
2 hrs.
3 hrs.
5 hrs.
Full Cure at 77°F
2 days
3.5 days
5 days
Minimum Recommended Temperature
55°F
55°F
55°F
Tensile Strength
7,700 psi
8,000 psi
7,300 psi
Tensile Modulus
380,000 psi
390,000 psi
360,000 psi
Tensile Elongation
7.5%
7.0%
6.7%
Flexural Strength
11,600 psi
11,600 psi
10,200 psi
Flexural Modulus
330,000 psi
360,000 psi
330,000 psi
Compressive Strength
9,500 psi
9,900 psi
8,900 psi
Volumetric Shrinkage
84
83
83
Hardness, Shore D
84
83
83
Intended for Clear Coating Applications?
YES
YES
YES
Maximum Pour Depth, Per Layer**
Less than 1/8″
1/8″
1/4″, up to 75°F, for larger pours, slabs
1/8″, over 75°F, for larger pours, slabs
3/8″, up to 75°F, for smaller castings using up to 1 oz. of epoxy
1/4″, over 75°F, for smaller castings using less than 4 oz. of epoxy
**NOTE:For 2:1 Slow Hardener maximum pour depth: Helping to dissipate heat from the cure will generally promote a more clear, smooth surface. If heat is not allowed to dissipate sufficiently from a mold or casting, it is still possible for pours, even with these guidelines, to generate enough heat to leave an imperfect surface or a slight yellow cast in the cured product.
